"Quick Start Guide" provided from AIST has some errors.
Please setup SAKURA-X as described below.

<1>
P.4 use the provided the template file sasebo_giii.xml.

"sasebo_giii.xml" does not work. Please set a USB interface IC as follows usign FT_Prog.

Device:0->FT EPROM->Hardware Specific -> Port A-> Hardware
 Chek 245 FIFIO
Device:0->FT EPROM->Hardware Specific -> Port A-> Driver
 Check D2XX Direct
Device:0->FT EPROM->Hardware Specific -> Port B-> Hardware
 RS232 UART
Device:0->FT EPROM->Hardware Specific -> Port B-> Driver
 Check D2XX Direct

<2>
P.4 ROM (28F128P30B, U13)

Please select "28F128P30" (but not 30B) to wirte the ROM file "asasebo_giii_aes.mcs" uing iMPACT.